SONIFEX Model DHY-03 Automatic Digital TBU, HyBrid Free StandingSONIFEX Model DHY-03 Automatic Digital TBU, HyBrid Free Standing
SONIFEX Model DHY-03 Automatic Digital TBU, HyBrid Free Standing.SONIFEX Model DHY-03 Automatic Digital TBU, HyBrid Free Standing.
SONIFEX Model DHY-03 Automatic Digital TBU, HyBrid Free Standing …..SONIFEX Model DHY-03 Automatic Digital TBU, HyBrid Free Standing …..

SONIFEX Model: DHY-03 Automatic Digital TBU, HyBrid Free Standing

sonifex hy03 logoModel: DHY-03

The digital DHY-03 telephone hybrid is probably the best performing digital hybrid in the world, with simply stunning line balance rejection figures. For the best sounding audio calls you’re likely to hear, you should specify the DHY-03.

Warning: in_array() expects parameter 2 to be array, null given in /home2/nftoufik/public_html/wp-content/themes/dxbtech_v2/woocommerce/single-product/meta.php on line 32

Warning: in_array() expects parameter 2 to be array, null given in /home2/nftoufik/public_html/wp-content/themes/dxbtech_v2/woocommerce/single-product/meta.php on line 38

Warning: in_array() expects parameter 2 to be array, null given in /home2/nftoufik/public_html/wp-content/themes/dxbtech_v2/woocommerce/single-product/meta.php on line 42
  • Description
  • Specifications

Description

DHY-03 Telephone Hybrid

<HY-03 logoThe digital DHY-03 telephone hybrid is probably the best performing digital hybrid in the world, with simply stunning line balance rejection figures. For the best sounding audio calls you’re likely to hear, you should specify the DHY-03.
The DHY-03 has the following features :
  • Fully automatic – adapts to varying line conditions and has automatic signal limiting.
  • Fully adaptive echo cancellation to 127msec – default is 24msec.
  • 76dB typical line balance rejection offering superb performance and crystal clear audio.
  • Front panel input and output gain controls.
  • Front panel LED metering of receive and send signals.
  • Built-in conferencing for 2 hybrids, so that a single telco channel on a mixing desk can receive 2 calls.
  • Integrated ring detector – automatic call answering after a pre-determined number of rings.
  • Automatic call disconnection. Fitted with K-break, line polarity reversal and dial tone disconnect detection, defined by the country selection.
  • Automatic ducking facility allows the talent to ‘shout-down’, or talk over, a caller by reducing the gain of the caller’s signal if it goes above a certain level.
  • Local and remote line hold switching – calls can be remotely switched through a mixing console.
  • Line hold/release button to control line hold circuit, illuminates to indicate the status of the line and flashes to show ring status.
  • DTMF tone recognition allowing a opto-isolated GPI output to be made on receipt of selected DTMF tones, e.g. for starting a studio automation recorder automatically to record a remote telephone interview.
  • International operation with built-in configurable settings for each country. Country selection allows the unit to provide line impedance and a simulation circuit to match the country.
  • RS232 serial port for remote control of the TBU, DTMF tone dialling and firmware upgrades to add new country settings.
  • Remote port distributes the remote line connect switch and tally output, a momentary/latch selector and the DTMF detect output.
  • The remote line connect switch can be either momentary or latching in its action.
  • Balanced mic/line input – 10k balanced input selectable for 0dBu clean feed line, or microphone level with adjustable gain.
  • Balanced output – 0dBu low impedance balanced output, with output gain settings.
  • Record output – the conferencing output can be set via a jumper to give a mix of the caller and mic/line input signals for recording both sides of the telephone conversation.
  • Line limiter, bandpass filter and output noise gate with preset threshold providing low distortion audio.
  • Built in universal power supply between 90V AC and 250V AC, 47-63Hz, IEC mains input.
  • ETSI approval compliant with European PTT specifications.
Which Format Is Most Suitable ?
The DHY-03 analogue hybrids are available in three models :
SCi logoThis product has settings that can be adjusted using the Sonifex SCi (Serial Control Interface) software. To download a copy of the SCi software, please use this link >
SCi Screens
Sci image - DHY-03
Dialpad Home Screen.
Sci image - DHY-03
Setting Screen.
Sci image - DHY-03
Disconnect Method Setting Screen.
Sci image - DHY-03
Disconnect Tone Setting Screen.
Technical Specification For DHY-03
Audio Specification
Input Impedance - Line Mode (Clean Feed):
10kΩ balanced 0dB
Input Impedance - Conferencing:
10kΩ balanced 0dB (not for DHY-03EC)
Input Impedance - Microphone Mode:
2kΩ balanced (not for DHY-03EC)
Input Level Gain Range:
+6dB, 0dB, and -6dB adjusted by 3-position front panel switch,
+10dB jumper
Microphone Level Gain Preset:
From 65dB to 35dB (not for DHY-03EC)
Maximum Input Levels:
Line +26dBu, mic -24dBu
Clean Feed Limiting Input:
-4dBu for CTR21 setting, other values available *
Bandwidth to Telephone Line:
250Hz - 4kHz, -3dB ref 1kHz
Telephone Line Impedance:
600Ω, 900Ω plus 14 other complex impedance circuits *
Output Impedance - Line Out:
50Ω balanced floating 0dBu
Output Impedance - Conference/Record:
50Ω balanced floating 0dBu
Output Level Gain Range:
+6db, 0dB, and -6dB adjusted by 3-position front panel switch
Rejection Ratio:
76dB on tones or complex waveforms, reference peak level of 0dB
Ring Detector Sensitivity:
Off, 2, 4 or 6 rings
Power to DHY-03, S & T
Universal 12Ω power supply: 90 to 250V AC; 47-63Hz; fused 1A
Power to DHY-03EC
±15 V DC @ 160mA per rail or regulated +5V DC @ 600mA
* These values are dependent on the actual country setting selected on the DHY-03
Connections
Mic/Line Input:
XLR 3 pin female, with push-button mic/line selection
Line Output:
XLR 3 pin male
Telephone Line:
RJ11 6/4 socket
Telephone Handset/Instrument:
RJ11 6/4 socket
Conferencing or Record Audio:
RJ45 socket
Remotes:
9-way D-type socket
RS232 Serial:
9-way D-type socket
Power:
IEC mains (CEE22)
Connections for Eurocard
64 pin DIN 41612 male (plug)
Each DHY-03, S & T unit is supplied with 1 x RJ11 to RJ11 telephone line lead, 1 x RJ11 to BT plug telephone line lead, 1 x BT handset socket to RJ11 plug adapter, IEC mains lead fitted with moulded mains plug, handbook and warranty card.
Physical Specification
Order Code
Description
Height
Width
Depth*
Total Nett
Weight
Total Gross Weight
DHY-03
Automatic digital TBU, free standing
4.5cm
1.8”
21.8cm
8.6”
17.5cm
6.9”
1.4kg
3lbs
2.2kg
4.8lbs
DHY-03 boxed
6cm
2.4"
34cm
13.4"
27cm
10.6"
DHY-03S
Automatic digital TBU, 19” (48cm) rack mounted
4.5cm (1U)
1.8” (1U)
48.3cm
(19” rack width)
17.5cm
6.9”
1.45kg
3.2lbs
2.3kg
5lbs
DHY-03S boxed
6.8cm
2.7"
58.8cm
23"
27cm
10.6"
DHY-03T
Twin automatic digital TBU, 19” (48cm) rack mounted
4.5cm (1U)
1.8” (1U)
48.3cm
(19” rack width)
17.5cm
6.9”
2.80kg
6.2lbs
4.4kg
9.7lbs
DHY-03S boxed
6.8cm
2.7"
58.8cm
23"
27cm
10.6"
DHY-03EC
Automatic digital TBU with ringing detector Eurocard model (PCB 10x16cm)
12.9cm (3U) 5” (3U)
4.0cm (8E) 1.6” (8E)
19.0cm
7.5”
150g
0.3lbs
500g
1.1lbs
DHY-03EC boxed
8.4cm
3.3"
38cm
15"
28.7cm
11.3"
*Depth is measured from the front to the end of the connectors fitted to the back of the unit.
Accessories
Order Code
Description
DHY-03CON
Front Panel Conversion Kit, DHY-03S to DHY-03
DHY-03SCON
Front panel conversion kit, DHY-03 free standing to DHY-03S
19” (48cm) rack-mount front
DHY-03TCON
Front panel conversion kit, DHY-03 or DHY-03S, to DHY-03T
19” (48cm) rack-mount front
DHY-03CONF
Conference Cable to Connect 2 x DHY-03 Units
DHY-03RLY
Latching Handset Relay Option for DHY-03, S and T