BS410

$0.00

2-Channel 2.4GHz Base Station

  • 2-channels of communications
  • 2.4GHz license-free operation
  • Supports up to 15 beltpacks in a single system
  • 7kHz wideband audio
  • 2-wire and 4-wire bridging on the same system
  • 2-wire auto-nulling
  • Lost packet concealment
  • Simple to set up and configure

Please click on the bellow link to build your system

http://www.dxbtechnology.com/product/ba410/

Compare

Description

  • BS410

    • 2-Channel 2.4GHz Base Station
    • 2-channels of communications
    • 2.4GHz license-free operation
    • Supports up to 15 beltpacks in a single system
    • 7kHz wideband audio
    • 2-wire and 4-wire bridging on the same system
    • 2-wire auto-nulling
    • Lost packet concealment
    • Simple to set up and configure
    Item Part Number:
    • CZ-BS410 for worldwide use
    • CZ-BS410-EU ETSI compliant base station for EU countries requiring CE mark

Specifications

Technical Specifications

Audio

Channels: 2 audio channels
Capacity: Up to 15 BP410 and/or WH410 per base station
Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex.
Radio Frequency Range: 2400 – 2483.5 MHz
Audio Frequency: 200 Hz – 7kHz
4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical
Aux Input: XLR-3F with ¼” (6.35mm) combo jack, 600 Ohms balanced, level adjustable
Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
Headset Connector: 4-pin mini-DIN, Electret microphone
Headset Output: 200mW into 32 Ohms
Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
System Distortion: <2%
Communication Security: dual-slot diversity

Transmitter

Type: Frequency Hopping, Spread Spectrum (FHSS)
Transmit Power: 100mW burst
Modulation Type: Gaussian filtered FSK, TDMA
Frequency Stability: 13 ppm
Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature

Receiver

Type: Frequency Hopping, Spread Spectrum (FHSS)
RF Sensitivity: <-90dBm w 10-3 BER
Frequency Stability: 13 ppm
Distortion: <2%

Power Requirements

100 – 240 VAC, 50 – 60 Hz or 12 – 14 VDCEnvironmental

Temperature: +32°F – +122°F (0°C – +50°C)

Dimensions

1.75 x 19.0 x 17.13 in
(44 x 483 x 435 mm) (HxWxD)

Weight

9 lbs (4.1 kg)

Reviews

There are no reviews yet.

Be the first to review “BS410”

Your email address will not be published. Required fields are marked *